Don't have time to read this now, pin it for later!
This blog post includes affiliate links. What does this mean? It means you will pay no more but I will get a small percentage for the referral.
Hello my laser loving and vinyl loving friends! I created this laser cut vinyl storage for all of the people looking for a storage solution that is not a bag holder.
What I love about this storage solution is that it has a low profile, sitting only about 3" off the wall! It is 18" tall and 5" wide with the holes being about 1.75". It can hold 10 vinyl rolls that are anywhere from 6" to 24+" wide.
Make multiple and hang together to make a seamless design. (I made two and have room for more!)
The things you will need for this project are:
- The Laser storage Cut File, you can grab here.
- Glowforge (or other laser engraver)
- 1/8 inch plywood. I used Utility Plywood from Home Depot. The sku is 0000-833-096.
- Super Glue. I use Gorilla Super Glue Gel (Affiliate Link Below)
- Spray Paint. (Whatever color your little heart desires)
- Unorganized Vinyl.
First upload this design into your laser cutting software and cut. I used a Glowforge. Don't have one? Grab one here, warning this is an addicting machine!
Next you will assemble the holder and use the glue to make sure it is secure!
Once you have it assembled, on to painting it! I chose a boring but functional grey! Next, I attached it (well had my husband attach it) to the wall with the screws.
And voilà..... time to add your unorganized vinyl and show off your creation!
Thank you so much for creating with me! Head on over to Instagram and tag me in your final products @kitaleigh.made!